Close

Member Login

  1. | 6 Jun 2013

    Termite Management Systems

    In 2000, a new Standard was adopted for termite risk management. The Building Code of Australia (BCA) requires a barrier to be installed where the primary building elements may be subject to subterranean termite attack. A primary building element is a member of a building that takes part of the building loads and includes roof, […]

  1. | 6 Jun 2013

    Tilers

    Tilers are not a Registered or licensed trade in Western Australia. Registration or Licensing is only required for builders, electricians, plumbers and painters. Tilers can obtain formal qualifications through TAFE, but many would have learned their skills “on the job” rather than be formally trained. There is a Ceramic Tilers Association to which some tillers […]

  1. | 6 Jun 2013

    Tiles and Cracks

    Lippage is a condition in floor tiling where one edge of a tile is on a different plane to an adjacent tile. In plain terms this means that one tile is higher than another giving the finished surface an uneven appearance. When large tiles are used on surfaces with compound falls to a floor waste, […]

  1. | 6 Jun 2013

    Tilt-Up Construction

    Tilt-up construction is common in the commercial and industrial building sector and it is becoming more popular in the housing sector as a construction method. Tilt-up construction is a form of precast construction walls where panels are built on the ground on site, lifted and placed, then propped in position while the roofing structure is […]

  1. | 6 Jun 2013

    Union Right of Entry

    This Fact Sheet provides information about the right of entry requirements in the Fair Work Act 2009 (Cth) (FW Act). Right of entry permits The right of entry provisions in the FW Act allow union officials who hold valid entry permits to enter employers’ businesses for certain purposes. Union officials can apply to Fair Work […]

  1. | 6 Jun 2013

    Solar Power System

    The Solar Panels collect the sunlight and create energy. They are attached to the roof by high strength rails able to withstand wind, rain and hail. The energy flows through to the Inverter which converts the current from Dc to AC (to usable household power).   A Bi-directional meter records the amount of power being […]

  1. | 6 Jun 2013

    Roof Frames

    Both timber and steel are used in roofs. Each material has advantages and disadvantages. Supporters of steel roofs (which are being used nowadays by a number of major builders) argue that it is more environmentally friendly, fire safe and termite proof. However the timber industry rejects these arguments, stressing the high level of embodied energy […]

  1. | 6 Jun 2013

    Renovation Costs

      We already know that kitchens, bathrooms and laundries are the most expensive parts of a home to add or update, but the cost of renovating can quickly add up even when it is a simple extra bedroom or games room at the back. New homes have fewer complications to overcome, and builders generally start […]

  1. | 6 Jun 2013

    Site Works and Contracts

    Site costs can be a difficult element of a building contract. In most situations, builders will not specify an exact amount for site works, but will nominate a “provisional sum” or best estimate which may be adjusted up or down depending on work actually required. Under the Home Building Contracts Act a builder cannot just […]