-
| 6 Jun 2013 Notice of Completion BA7
Notice of completion – click here to read the article Form BA7 pdf Form BA7 word
-
| 6 Jun 2013 Glass and Accidents
Unfortunately, there have been a number of accidents in family homes causing serious injury and even death due to incorrect types of glass installed. Although traumatic for the victim, it is also an issue for the owner of the property when it is leased to tenants. Houses constructed before the mid 1970’s often used […]
-
| 6 Jun 2013 Home Finishes
Home finishes When you build or renovate, the finishing touches are the ones that make the house into a home, the personal choices made of the furniture, decorative pieces, the wall colours and floor finishes can make a stark space into a welcoming cosy room or a modern energising area. The dilemma is that there […]
-
| 6 Jun 2013 Insuring Your Home
The insured value of many properties is well below their current replacement costs. Many homeowners have renovated or extended their properties without increasing the sum insured, and construction costs have escalated. For insurance purposes, it is suggested that homeowners at least apply a rule of thumb of between $1000 to $1100 per square metre for […]
-
| 6 Jun 2013 Insulation Types
Loose Fill Loose fill materials include cellulose fibre and mineral wool, and is mainly used as ceiling insulation. It is simply pumped into the roof space, or sometimes the wall cavity. Since there’s no cutting, fitting or stapling it’s one of the fastest and easiest insulation types to install. Cellulose has been rated currently (by […]
-
| 6 Jun 2013 Insulation – Downlights
Special provisions apply for the installation of insulation near downlights. Where this occurs, it can increase fire risk if there is insufficient clearance and air ventilation around electric lights and fittings. As a result of these concerns, Standards Australia has issued rules which require a clearance of 200mm around lamps and transformers. Any combustible building […]
-
| 6 Jun 2013 Indoor Air
Home owners are starting to pay a lot more attention to indoor air quality when selecting building products. This is particularly the case where children, elderly, or sick are involved, as they are more vulnerable to toxins. It has been estimated that we spend 90% of our lives indoors, so it is no wonder that […]
-
| 6 Jun 2013 BCA: Class 1a vs Class 2
Classification of a building is of paramount importance for the viability of a project. Getting it right from the start will ensure you are not over or under-specifying your buildings. Large developments are sometimes classified incorrectly as Class 2 based on the scale, instead of the actual definition of the buildings of the development. This […]
-
| 6 Jun 2013 Concrete Cancer
Concrete cancer often occur in coastal areas where sea salt can cause unwelcome reactions in brickwork, mortar and concrete slabs. Efflorescence is a powdery white salt deposit that can form on cement-based products like bricks, mortar and sometimes concrete. It usually appears when dry, hot weather follows a period of cool wet weather. Evaporation of […]
-
| 6 Jun 2013 Construction Costs
Construction costs have risen strongly in recent years and it is important that your building is accurately valued at replacement cost for insurance purposes. If you have not reviewed the “sum insured” on your home recently, then you should do so. To give you a general guide as to recent trends in building costs, you can […]