-
| 6 Jun 2013 Redevelopment Authorities
The WA Government has established a number of redevelopment authorities to expedite the development of land in WA. They operate by suspending local and state planning laws and introducing redevelopment schemes to govern development in a defined area. Current redevelopment authorities include: Armadale Redevelopment Authority The Armadale Redevelopment Authority (ARA) is tasked is to plan, […]
-
| 6 Jun 2013 Recycling
Many building products can be recycled in Western Australia, some of which are listed below. Remember that this list does not reflect the ease of recycling material on every job. It is important for you to investigate the opportunities available for recycling in your local area and consider opportunities for recycling specifically for your project. […]
-
| 6 Jun 2013 Renovation and other checks
If you are uncertain as to the condition of the building’s foundations or the general soundness of the house, it may be worthwhile to call in an inspector or engineer for a professional opinion. You should find, however, that if you borrow funds for your extensions, the lender will have their own inspectors check that […]
-
| 6 Jun 2013 Shower Floors – Slope
Tiling in Shower Recesses The minimum standard required for wet areas in residential buildings is contained in the Building Code of Australia (BCA) and AS3740 – Waterproofing of wet areas in residential buildings. This includes tiling and gradients of bathroom floors including shower recesses. The recommended ratio of fall within showers is between 1:60 and […]
-
| 6 Jun 2013 Security: Outdoor
There are many things which can be done to make sure that your new or existing dwelling is as secure as possible. We will talk about security from the outside in, and what other measures can be taken to further enhance your family home’s security and safety. One thing that needs to be realized is […]
-
| 6 Jun 2013 Solar Systems Installed in Australia
Residential 1kW systems are most common at the moment due to the Federal Government Rebate funding up to a maximum of a 1000 watt (1kW) system. A lot of customers are installing 2 or 3 kW inverters in their systems however so that they can add additional capacity in the future as power get […]
-
| 6 Jun 2013 Skylights – Size of Skylights
Sizing of a skylight is dependant on the level of illumination required. The table in ‘Size of Skylights,’ provides guidance for average installations under average related conditions. It also assumes that some other form of lighting, such as borrowed light from a window, contribute to the overall result in the living areas for a satisfactory […]
-
| 6 Jun 2013 Steel – Corrosion Protection
Hot dip galvanizing is a coating for steel made from an alloy of zinc and iron. Galvanizing is a once-only process – no substrate preparation and multiple coating is required. It offers total coverage – all exposed steelwork is coated both internally and externally. Galvanized coatings protect steel even at its most vulnerable areas. It […]
-
| 6 Jun 2013 Insulation – Downlights
Special provisions apply for the installation of insulation near downlights. Where this occurs, it can increase fire risk if there is insufficient clearance and air ventilation around electric lights and fittings. As a result of these concerns, Standards Australia has issued rules which require a clearance of 200mm around lamps and transformers. Any combustible building […]
-
| 6 Jun 2013 Liveable Homes
Liveable Homes: Resource for designing new homes A resource has been developed to support designers and builders improve the adaptability and accessibility of new housing designs. Our population is ageing, and the number of people with disability is also on the increase. The ‘Livable Homes’ resources have been developed by the Disability Services Commission with […]